Description:
Red Garden Paint’s RG- 100 - Flower
is an excellent and durable semi plastic emulsion paint with
a smooth and velvety finish. Is the natural choice for people
who want full value for their money. RG- 100 – Flower
is long lasting, quick drying and suitable for all types of
surfaces not just walls and ceiling but hard board/chipboard
and wooden surfaces as well.
RG- 100 – Flower has an infinite variety of appealing
colours to choose from, which means that virtually everyone
can choose his or her particular favourite shade. When properly
applied, RG- 100 – Flower adds a touch of elegance and
class to every home. Due to its excellent leveling properties
it gives a smooth, velvety finish without overlap or brush
marks.
SURFACE PREPARATION
AND APPLICATION:
The concrete surface should be dry, free
from efflorescent salts and loose adhering matter. Remove
dirt, greasy and wax material scuff with suitable sand paper,
dust off and prime with Red Garden Wall Primer Sealer. Fill
the surface imperfections with a paste made from 4 parts Chalk,
1 part Zinc Oxide and 4-5 parts Red Garden Wall Sealer and
leave the filler to dry overnight, scuff with sand paper,
dust off and apply another coat of the pre prepared sealer
followed by 2-3 coats of Red Garden RG-100 Semi Plastic Emulsion.
TECHNICAL DATA:
| Binder Type |
Copolymer Vinyl Emulsion |
| Colours Available |
White, Off White, Ash White, and all shades exhibited
in our shade Card. |
| Application |
Brush , and Roller |
| Average Spreading Rate |
Gives complete finished area 12-16 Sq. Meters, Per litre
. |
| Mixing |
For painting new and bare surfaces use water up to 50%
of the paint thinning, but for normal use it should not
go beyond 25-50%. |
| Drying Time |
i ) Depends upon temperature and environmental conditions. |
| |
ii ) Recoatability 1-1/2 Hours |
| |
iii) Hard Dry 4 Hours |
Number of Coats
|
2-3 Coats |
| Finish and Gloss |
Smooth and Glossy. |
| Storage Stability |
Eight Months when stored properly in original sealed
containers. |
| Packing |
24 Kg, 6 Kg. or in Project Packing. |
I
I
I
Recommended spreading rate per liter based upon minimum recommended
dry film thickness per coat. No allowance is made for material
loss during application.
I 
