Description

PVC Solvent Cement is a premium quality low viscosity, easy to use, fast setting and offering superior bonding strength adhesive formulated for PVC pipes and fittings. The product is ideal bonding and coupling of rigid PVC/UPVC/CPVC pipes and fittings for cold and hot ( upto 60° C  ) water and sanitary lines for domestic, commercial and industrial applications behaving as a cold weld joint of the two ( male –female ) parts such as sockets, elbows, T’s, Y’s, valves etc. It is completely safe for drinking water upon complete curing, irrigation, wastewater, sanitary pipes and conduits etc. The weld-bond so obtained between pipes and fittings withstand the normal line pressures and remain unaffected by hot and cold water running through the lines, for years as long as it is left undisturbed. Similarly it is quite effective used as adhesive to bond different PVC based objects together.

Specification:

Appearance                             Milky Orange Liquid
Odour                                      Aromatic Odour
Solid Content                          20-22%
Viscosity                                 200-250 CPS ( S4, 50 RPM )
App. Temp.                             - 10°C to 40°C
Service Temp.                         - 10°C to 60°C
Shelf Life                                12 Months
Main Solvent                           Hydrocarbon Solvents
Main Ingredient                       Synthetic Resin

Application Procedure:

                               Shake or Stir before use

1. Cut pipe evenly by hand saw or pipe cutter and remove burrs from in & outside.
2. For best results prime with SCP 2022 PVC Solvent Cement Primer to both the pipe and fitting which will remove the dirt and oil from the surface of the piping as well as soften the piping in preparation for solvent welding.. And then apply SCH 2023 PVC Solvent Cement to both the parts with a dauber, brush in can or roller. For large voids apply a second even layer on the pipe.
3. Without delay push the pipe into the socket touching the bottom in ¼ turn twist motion and hold for 10-20 seconds to make sure the pipe does not pop out and remove excess material without disturbing the joint.
4. 15 minutes set time must be allowed before handling. Full curing testing time depends upon the pipe size, temperature and pressure. Larger diameter pipes would require longer cure time.

Health & Safety:

The product is a hazardous substance within the meaning of current Dangerous Substance Regulations. Contains M.E.K., Cyclohexanone, Acetone and purple dye. Adequate ventilation must be ensured to avoid flash fire. Vapour build-up may cause headaches, dizziness or eye watering. Use respiratory protection if symptoms experienced and leave the area forthwith to ensure more fresh air. Contact with eyes, skin & clothing must be avoided, while using wear protective clothing. Do not reuse empty containers, keep out of reach of children.

Danger:Extremely Flammable. Vapour may cause flash fires. May irritate eyes and skin. Vapour harmful and may irritate respiratory tract and cause nervous system depression. Harmful & Fatal if swallowed.

First Aid:If difficulty in breathing is experienced, move to fresh air. In case breathing problem persists seek medical advice. In case of eye contact flush thoroughly with water for 15 minutes. Get immediate medical attention. If swallowed, give 1 to 2 glass of water immediately & seek medical help. Do not Induce Vomiting.

Fire:Use dry chemical foam or carbon dioxide extinguisher. Water spray may be applied to reduce potential vapours or for cooling. Burning liquid extinguished with water will float and may re-ignite on surface of water.

Storage & Shalf Life:Highly inflammable. Keep away from heat source or naked flames. Store in dry and cool place below 25°C. Use within 12 months from the date of production.

Packing:The product is available in 75, 120 , 240, 480 and 950ML with brush in can. 25 and 205 Ltr Metal Cans also available

Note: Read all the directions carefully before using this product. Do not breathe vapours. Use only in well ventilated area. If adequate ventilation is not available use approved respirator for organic solvents. Do not use or store near heat, sparks or flames. Do not smoke, eat or drink when using. Do not take internally. If jelly-like do not use. Keep container air tight when not in use. Avoid eye & skin contact/ Wear safety glasses with side shield & rubber gloves.

Limited Warranty:
Since Red Garden Paints does not control the application of its products, nor the condition of the surfaces to which they are applied, a Limited Warranty is provided. If the products do not perform as specified. Red Garden Paints liability will under no circumstances exceed replacement of the product.

  I  Email us I  Print page